Is adding phenolphthalein affect titration?

Table of Contents

Is adding phenolphthalein affect titration? Phenolphtalein is slightly acidic. It does affect titration because if you add too much, then it will alter the concentration of whichever solution you are adding it in. If you added it to the acid, it will cause that acid to be more acidic than you may have calculated.

Why is phenolphthalein added to the titration? Phenolphthalein is used as an indicator in acid-base titration as it indicates the change in pH by changing its colour [actually, going from colourless (in acidic solution) to pink colour(in basic solution)].

Why phenolphthalein Cannot be used in this titration? In the same way in the Titration of weak base versus strong acid there is a sudden change in the pH of 3.5 to 8.0,near the neutralisation point. So Phenolphthalein can’t be used since its pH range is 8.3 to 10.0.

What is the purpose of adding phenolphthalein to the titration flask? A commonly used indicator for strong acid-strong base titrations is phenolphthalein. Solutions in which a few drops of phenolphthalein have been added turn from colorless to brilliant pink as the solution turns from acidic to basic. The steps in a titration reaction are outlined below.

Is adding phenolphthalein affect titration? – FAQ

What would happen during a titration if you forgot to add phenolphthalein?

If we forgot to add the phenolphthalein to the Erlenmeyer flask, no chemical reaction or color change would occur. Therefore, there will not be a change in the pH in the solution and you will not know the equivalence point either.

What does adding more phenolphthalein do?

Phenolphtalein is slightly acidic. It does affect titration because if you add too much, then it will alter the concentration of whichever solution you are adding it in. If you added it to the acid, it will cause that acid to be more acidic than you may have calculated.

Why can’t phenolphthalein be added to the titration mixture used in the determination of PKA?

In the same way in the Titration of weak base versus strong acid there is a sudden change in the pH of 3.5 to 8.0,near the neutralisation point. So Phenolphthalein can’t be used since its pH range is 8.3 to 10.0.

Why phenolphthalein is not a suitable indicator in the titration of a strong acid vs weak base?

Answer: Why is phenolphthalein not a suitable indicator for titrating weak base against strong acid? – Quora. Because the equivalence point of a weak base-strong acid system is likely going to be outside of the color indicator range of phenolphthalein.

Why phenolphthalein is not a suitable indicator for the titration of Na2CO3 with HCl?

Na2CO3 act as a weak base and HCl is a strong acid. Phenolphthalein is not a suitable indicator for titrating weak base against strong acid because the equivalence point of the titration will result in an acid salt(NaHCO3) which cannot go to completion.

Why did we add phenolphthalein to the ch3cooh before starting the titration?

In the titration of acetic acid with aqueous NaOH, phenolphthalein is used as the indicator. Phenolphthalein is nearly colorless in acidic solution, but turns pink at a pH of about 8. This indicates that the base has neutralized all the acid.

Why is phenolphthalein added to an unknown acid before starting the titration?

It is an indicator to show the acidity of the solution to show when the reaction is complete; by a change of color. Phenolphthalein is used for strong acid-strong base titrations.

When adding acid to base the phenolphthalein indicator changes colour from Colourless to pink at the end of the titration?

Phenolphthalein: Phenolphthalein is a chemical used as an indicator in acid-base solutions. In particular, phenolphtalein turns colorless when added to an acidic solution while this chemical turns pink when added to a basic solution.

Does adding too much indicator affect titration?

The indicator itself is either a weak acid or a weak base. Adding too much indicator will force your titration to significantly include the indicator an an interfering analyte component competing with your titrant against the acid or base which you are expecting to measure.

How much phenolphthalein should be added during the experiment of acid base titration?

Add about 20 mL of distilled water into the flask and add 2-3 drops of phenolphthalein indicator. The flask should remain colorless at this point.

What does Phenolphthalein solution indicate?

Phenolphthalein is an indicator — a chemical which changes colour depending on whether it meets an acid or a base. It turns purple if it meets something basic, such as ammonia; it stays colourless if it meets an acid like vinegar or a neutral substance like water.

Why is it important that you remember to add 2 or 3 drops of Phenolphthalein indicator to each of the acid solutions that you will titrate?

If more than 2–3 drops are used, we would need more amount of base to neutralize your indicator. Thus, end point would shift to a slightly higher value. This would make the acid appear more concentrated than it really is.

What color change does phenolphthalein undergo during this titration?

13 What color change does phenolphthalein undergo during this titration? Phenolphthalein would change from colorless to pink as base is added.

When phenolphthalein is used as the indicator in a titration of an HCl?

When phenolphthalein is used as the indicator in a titration of an HCl solution with a solution of NaOH, the indicator undergoes a colour change from colourless to poink at the end point of the tiration.

Why is methyl orange used for titration of carbonates?

When titrating carbonates, which are weak acids, we typically use strong acids. Methyl orange is a pH indicator frequently used in titrations because of its clear and distinct colour change. Because it changes colour at the pH of a midstrength acid, it is usually used in titrations for acids.

Why phenolphthalein is a weak acid?

Because it indicates the pH of the solution, it is colourless below 8.5 pH and is able to attain a pink to deep red colour above 9.0 pH. Phenolphthalein is a weak acid and it dissociates in water to give pink anions. Hence, we can say that phenolphthalein is a weak acid.

Why is phenolphthalein not much appropriate to identify whether the given solution is acid base or salt?

Both in acid medium and neutral medium, Phenlopthalin makes the solution colorless and only in Basic medium, It shows pink color. So, I think it’s not appropriate.

Is phenolphthalein the best indicator for this experiment?

– Other indicators like methyl orange change its colour at around a [pH]of 4. So, there is a considerable difference between the [pH]of the colour change of the indicator and the equivalence point for the titration of the weak acid and strong base. – So, phenolphthalein is the best indicator in this case.

How phenolphthalein does behave in acidic and basic medium?

Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions. It is a weak acid, which can lose H+ ions in solution.

What was the purpose of adding the indicator to each titration?

The point at which the indicator changes color is called the endpoint. So the addition of an indicator to the analyte solution helps us to visually spot the equivalence point in an acid-base titration. Endpoint: refers to the point at which the indicator changes color in an acid-base titration.

Is phenolphthalein indicator affected by pH?

Acid-base indicators are used to help scientist determine when the pH of a solution changes. For example, a common indicator in an acid base titration is phenolphthalein. When the solution is basic, phenolphthalein will be pink. When the solution is acidic, phenolphthalein will be colorless.