How To Measure My Horse For A Saddle?

How To Measure My Horse For A Saddle? How to Take Measurements. To measure the skirt of the saddle, simply measure from the front edge of the saddle all the way to the back edge of the saddle. Compare the measurements to your horse. Start your measurement on your horse a few inches behind their shoulder blade to get a proper measurement.

How do you know what size saddle your horse needs? There should be about four inches between your body and the swell of the saddle. Anything less than that may mean a too-small saddle, and a bigger gap means the saddle may be on the large size. Larger may be more comfortable for you. Western riders with longer legs should choose a larger-size saddle.

How do you measure a horse for a western saddle? To measure a saddle, grab a tape measure and vertically measure the length from the back of the pommel to the seam of the cantle. The measurement should usually be between 12 and 19 inches.

How do you properly fit a saddle to a horse? Your saddle fits just right if it sits level on your horse’s back and the bars of the tree do not pinch. The front of your saddle should be positioned behind your horse’s shoulder blade, allowing him freedom of movement. Your saddle is too narrow if the front of the saddle sits high.

How To Measure My Horse For A Saddle – Related Questions

How far up do you put a saddle on a horse?

Place the saddle on the horse’s back.

The saddle should sit in the hollow just below the withers with about 3 inches of the pad showing in front and in the back.

What size saddle do I need for a 15hh horse?

Scapular to last rib 47cm/18 ¼” when you take off 5cm/2” for shoulder movement, that gives you 42cm /16” very small space for a saddle on a 15hh horse. 16.5” saddle set as far back as it can go without going past the last rib.

Can a saddle be too short for a horse?

A saddle can’t really BE too small for a horse – yes it can look like a pea on a drum, but as long as it is big enough for a rider it matters not.

How do you measure a saddle gullet?

The gullet of the saddle is the gap between the two bars of the saddle tree. It is measured at the front of the saddle. You measure your Western saddle’s gullet by stretching a tape measure from concho to concho across the front of the saddle directly below the pommel.

What is a gullet on a saddle?

The gullet is the tunnel underneath the fork and rides over the horse’s withers. The design of the fork and the angle of the bars of the saddle tree determine the width and height of the gullet. Horses gullet, horses, saddle, tack.

Can a saddle be too long for a horse?

A horse ridden in a saddle that is too long will often tighten his lower back muscles; in some cases, you can actually see the horse hollow and drop his back in an attempt to get away from the pressure of the saddle. He may even buck in extreme cases, in an effort to get the weight off his lumbar area.

Where should a cinch sit on a horse?

The lowest point your cinch should sit is 3-4″ above the elbow. This allows clearance and no interference when riding. The best way to get an accurate cinch size is to take a string and hold it on one side 3-4″ above the elbow. Then you run it under the horse, to the same point on the other side.

Is my saddle too far back horse?

A saddle positioned too far back tends to sit on the “floating ribs”. This is the “bucking reflex point” – pressure on these unsupported ribs causes considerable discomfort, which can lead to bucking as the horse tries to alleviate the pressure.

What is considered a short backed horse?

A horse is considered short-backed if his back length is less than one-third of his body length (measured from the point of shoulder to the point of buttock when the horse is standing square). Therefore, the shortness of this area where the rider sits will help the horse’s back from sagging under applied weight.

How tight should a saddle be?

Do not over tighten the cinch. The tighter you cinch the more pressure YOU create before you even sit in the saddle. The front cinch should be about as tight as your belt; if it’s comfortable for you, then it should be comfortable for the horse. Do not over tighten the cinch to compensate for a saddle that rolls.

How wide should a saddle gullet be?

The ideal width for a saddle gullet is between 2.5″ and 4″ depending on your horse.

How do I know if my saddle has full quarter horse bars?

Measure the gullet by stretching a measuring tape from concho to concho across the front of the saddle, not over the top. Saddles with semi-quarter horse bars usually have gullets of 6 1/2 inches to 6 3/4 inches, while those with full quarter horse bars will feature gullets of 7 inches.

What does full bars on a saddle mean?

Bar Measurements

This size saddle fits a horse who is healthy without excess fat or muscles on his upper shoulders. Full quarter horse bars are 6 1/4 to 6 1/2 inches apart. This size fits horses who are wider in the front shoulders than a semi-quarter horse bar size with extra muscle or fat.

What is a swell on a saddle?

Swell: The swell is the part of the saddle that holds the bars together and supports the horn. 1. They are still a very widely used style on today’s working ranch saddles.

Is my western saddle too long for my horse?

Stand back and look at your horse from the side to be sure the saddle is not too long for his back. A too-long saddle will put pressure on the withers and loin area. The saddle should never make contact with the horse’s spine or withers at any point. Look at the gullet.

How long does a saddle fitting take?

A fitting appointment can vary in time depending on what is happening at the appointment. Check of your existing saddle = approximately 45-60 minutes with you. Try on new/used saddles = approximately 2-2.5 hours.

Why is my saddle so heavy?

Western saddles can be heavy for lots of different reasons: they can be heavy because they are meant to keep a rider comfortable, they can be less heavy to help a horse’s back, they can be heavy because they are made with a certain cut of leather with metal embellishments, and they can be heavy because you have saddle

How tight should a horse cinch be?

Your cinch only needs to be tight enough for you to mount without the saddle slipping. If your horse has good withers, you won’t have to over-tighten; if he has poor withers, he’ll have to get used to a much tighter cinch. It’s a good idea to check your cinch for tightness again about 10 minutes into your ride.

Why does my saddle roll when mounting?

Make sure you have sensible tension on your girth, a saddle slipping sideways is often caused by having the girth too loose, many horses expand the chest when the girth is first tightened, once mounted circle a couple of times then re-tighten the girth.

How do I know if my horse has high withers?

High Withers

The bump where its shoulder blades meet between the neck and the back is taller than average, causing a sharp angle from the tip of its withers to its shoulders. A high-withered horse also has a slightly narrower back compared to a horse with normal withers.

What size is a wide tree?

A saddle that has full quarter horse bars, also known as a wide tree, generally has a measurement of 90 degrees, plus or minus 3. A very wide tree will have an angle of 94 degrees plus or minus 3. Very wide trees are often used on large horses such as drafts.