Table of Contents
How To Measure Horse For Saddle Fit? Saddle Shopping
“The best thing to check saddle fit at the tack store is to measure your horse with a flexible wire,” Seidel advises. “Shape the wire over the withers 3-to-4 inches behind the scapula, which is where the fit needs to be most correct.
How do you measure what size saddle seat you need? To measure the seat of a western saddle you should measure from the back of the swell at the top of the gullet back to leading edge of the cantle. There should be approximately four inches between your crotch and the fork (or swells).
Are treeless saddles bad for your horse? But a treeless saddle can cause injuries as well. Treeless saddles (which are essentially bareback pads) may work for a while, especially if the horse has been ridden in a badly fitting treed saddle, but eventually constant pressure will cause long-term damage.
How do you determine the width of a saddle? Place the foil or cardboard on a carpeted stair and sit down, then pick up your feet to mimic your riding position. When you stand up there should be two depressions left by your sit bones. Measure the distance between the centres of the depressions and add 25 to 30mm to find your ideal saddle width.
How To Measure Horse For Saddle Fit – Related Questions
What saddle width do I need?
1 – Seat-Bone Width
The first thing to consider is the distance between your seat bones. Your seat/sit bone width determines the ideal width of the saddle you should choose. Specialized, for example, recommend a 130 mm saddle width for narrow sit bones, 143 mm for medium, and 155 mm for wide sit bones.
What size gullet is a wide tree?
Any gullet that measures larger than 7 inches is considered to be wide. An extra-wide gullet is going to measure 8 inches or more and is commonly found only in saddles designed to fit draft horses or draft horse crosses.
How wide should a saddle gullet be?
The ideal width for a saddle gullet is between 2.5″ and 4″ depending on your horse.
Will a treeless saddle fit any horse?
While there might not be a full tree inside a treeless saddle, some may have a flexible fiberglass cantle and pommel. Other types of treeless saddles may have only layers of padding. Just because a saddle is treeless does not mean that it will fit any horse you put it on.
Is a treeless saddle better for a horse?
Treeless saddles are often said to be more “natural,” more comfortable for riders and/or horses, or more universally fitting for all equine back shapes and rider seats. But according to a leading equitation scientist, the tree still seems to serve a very important purpose: regulating pressure distribution.
Are Western saddles better for the horse?
Saddles aren’t bad for horses but actually benefit horses by dispersing the riders’ weight. Saddles are necessary because without a saddle, the rider doesn’t have a firm seat, and even a sixteen-year-old could feel three times heavier than her weight without a saddle.
How do I know if my western saddle is too narrow?
Your saddle is too narrow if the front of the saddle sits high. When the saddle is sitting directly upon the horse’s withers, pinching can often occur. Your saddle is too wide if the front of the saddle is low. This also results in pinching but at the top of the saddle’s bars.
How do you tell if your saddle is too small for you?
While you don’t generally see many people riding in saddles that are too large, it’s common to see riders in saddles that are too small. As a rule of thumb, you should be able to fit at least a four-finger width between the end of your seat and the cantle. Any less than that and the saddle is too small.
Is my saddle too narrow?
If the saddle is too narrow, the pommel will be too high at the front throwing the rider’s weight to the rear and putting weight and pressure through the loin area of the horse. ‘ By bridging we mean that there is not full contact by the panels all along the length of the saddle onto the horse’s back.
What tree size fits most horses?
Semi-Quarter horse bars usually have a 6 1/4″ gullet, and Quarter Horse Bars usually have a 6 1/2″ to 6 3/4″ gullet. Designed to fit the average horse, one of these two widths will fit approximately 80% of horses comfortably.
What size is a wide tree?
A saddle that has full quarter horse bars, also known as a wide tree, generally has a measurement of 90 degrees, plus or minus 3. A very wide tree will have an angle of 94 degrees plus or minus 3. Very wide trees are often used on large horses such as drafts.
How do I know if my horse needs a wide tree?
With the saddle positioned correctly-the bars of the tree behind the shoulder blades of the horse-evaluate the following points: If there is room for only one finger, or the bottom of the gullet is touching the top of the wither, the tree is probably too wide.
Can a saddle be too short for a horse?
A saddle can’t really BE too small for a horse – yes it can look like a pea on a drum, but as long as it is big enough for a rider it matters not.
What width saddle for 130mm sit bones?
Many suggest adding about 20mm, as signified by the Road Bike Bros above, which would then land you on the ideal saddle. For example, if your sit bones measured 130mm, you add 20mm and voila, a 150mm saddle width will fit perfectly!
How much should I add to sit bone width?
Your sit bones will leave an indentation on the paper. Use a measuring tape to measure the space between the indentations in millimeters not inches. Once you have the measurement, add 2cm (or 20mm). Saddle width is approximate to sit bone spacing + 2cm.
How do you tell if a saddle fits the rider?
So how do you know if a saddle fits the rider? There used to be the “one hand” rule: if the saddle was correct for the rider, the rider should be able to put one hand across the saddle seat between the back of their butt and the end of the cantle.
How do you measure the gullet on a saddle?
The gullet of the saddle is the gap between the two bars of the saddle tree. It is measured at the front of the saddle. You measure your Western saddle’s gullet by stretching a tape measure from concho to concho across the front of the saddle directly below the pommel.
Is a wider saddle better?
The shape of the saddle determines its best use. Wider saddles tend to be more comfortable so are good for long rides or leisurely riders where extra weight from more materials isn’t an issue. You need to be careful, if the saddle is too wide it can chafe whilst too thin can put a lot of pressure on soft parts.
What is a gullet on a saddle?
The gullet is the tunnel underneath the fork and rides over the horse’s withers. The design of the fork and the angle of the bars of the saddle tree determine the width and height of the gullet. Horses gullet, horses, saddle, tack.
How do you make a wide saddle fit?
When a saddle is just a bit too wide all over, using a thick saddle pad can improve the fit. A thicker pad will help to fill in the space between your horse’s back and the saddle, resulting in a snugger, and usually more even fit.
How do you fit a saddle to a horse with high withers?
In fitting a saddle to a high-withered horse, you will need to lift the saddle away from the withers or have a saddle with high gullet built-in. This can be accomplished by using a saddle whose panels or bars match the slope of the horse’s back muscles, then raising the saddle up off of the withers using pads.