Table of Contents
How To Measure A Saddle To Fit Your Horse?
How do you tell if your saddle doesn’t fit your horse? Physical Signs
Swelling along the back, saddle sores, girth galls etc are all tell-tale signs of poor saddle fit. After riding and removing the saddle, uneven sweat patterns under the saddle pad can indicate an issue with saddle fit. These come about when the saddle is making uneven contact with your horse’s back.
Do you buy a saddle to fit the horse or the rider? As well as fitting the horse, it’s important that the saddle fit the rider. A saddle that is too small will cause discomfort as you bump against the pommel at every stride (believe me, I’ve been there) A saddle that is too large will have you swimming around trying to maintain your position.
What size saddle do I need for a 15hh horse? Scapular to last rib 47cm/18 ¼” when you take off 5cm/2” for shoulder movement, that gives you 42cm /16” very small space for a saddle on a 15hh horse. 16.5” saddle set as far back as it can go without going past the last rib.
How To Measure A Saddle To Fit Your Horse – Related Questions
Can a saddle be too short for a horse?
A saddle can’t really BE too small for a horse – yes it can look like a pea on a drum, but as long as it is big enough for a rider it matters not.
Is my saddle too narrow?
If the saddle is too narrow, the pommel will be too high at the front throwing the rider’s weight to the rear and putting weight and pressure through the loin area of the horse. ‘ By bridging we mean that there is not full contact by the panels all along the length of the saddle onto the horse’s back.
What width saddle do I need?
Place the foil or cardboard on a carpeted stair and sit down, then pick up your feet to mimic your riding position. When you stand up there should be two depressions left by your sit bones. Measure the distance between the centres of the depressions and add 25 to 30mm to find your ideal saddle width.
What size gullet is a wide tree?
Any gullet that measures larger than 7 inches is considered to be wide. An extra-wide gullet is going to measure 8 inches or more and is commonly found only in saddles designed to fit draft horses or draft horse crosses.
What is a saddle gullet measurement?
The gullet of the saddle is the gap between the two bars of the saddle tree. It is measured at the front of the saddle. You measure your Western saddle’s gullet by stretching a tape measure from concho to concho across the front of the saddle directly below the pommel.
How do you fit a saddle to a horse with high withers?
In fitting a saddle to a high-withered horse, you will need to lift the saddle away from the withers or have a saddle with high gullet built-in. This can be accomplished by using a saddle whose panels or bars match the slope of the horse’s back muscles, then raising the saddle up off of the withers using pads.
How do I know if my horse has high withers?
The bump where its shoulder blades meet between the neck and the back is taller than average, causing a sharp angle from the tip of its withers to its shoulders. A high-withered horse also has a slightly narrower back compared to a horse with normal withers.
What happens at a saddle fitting?
Your qualified saddle fitter should:
Stand the horse up square to assess his conformation and back before watching him walk and trot in-hand. Watch the horse in action, including over jumps if necessary. Take detailed notes of your horse and his conformation to see how his shape and requirements change over time.
Are schleese saddles good?
Registered. Wellthey are really nice saddles. Among custom english saddles, they are high-range, pricewise. You might try Albion; they also do custom fitting and are a tad cheaper, but I don’t know how their service compares to Schleese.
What size saddle does a 16hh horse need?
Between 16.5 and 18.5 inches — Look for a 16-inch saddle. Between 20 and 21.5 inches — Try a 17-inch saddle. Over 21.5 inches — Try an 18- or 19-inch seat size.
What size saddle do I need for a 14.2 hh pony?
if you have a long leg then a 18inch but your 14.2hh may be too short in the back and may need a 17inch, might get away with a 17.5 inch.
Is my saddle too far back horse?
A saddle positioned too far back tends to sit on the “floating ribs”. This is the “bucking reflex point” – pressure on these unsupported ribs causes considerable discomfort, which can lead to bucking as the horse tries to alleviate the pressure.
What is considered a short backed horse?
A horse is considered short-backed if his back length is less than one-third of his body length (measured from the point of shoulder to the point of buttock when the horse is standing square). Therefore, the shortness of this area where the rider sits will help the horse’s back from sagging under applied weight.
Can a saddle be too long for a horse?
A horse ridden in a saddle that is too long will often tighten his lower back muscles; in some cases, you can actually see the horse hollow and drop his back in an attempt to get away from the pressure of the saddle. He may even buck in extreme cases, in an effort to get the weight off his lumbar area.
Is my western saddle too narrow?
There should be two to three fingers space between the top of the wither and the gullet of the saddle. If you can vertically fit your whole hand between the bottom of the gullet and the wither, the tree is probably too narrow.
How do I know if my western saddle is too narrow?
Your saddle is too narrow if the front of the saddle sits high. When the saddle is sitting directly upon the horse’s withers, pinching can often occur. Your saddle is too wide if the front of the saddle is low. This also results in pinching but at the top of the saddle’s bars.
What if saddle is too wide?
When a saddle is too wide in the front, it can sink down over the withers. This takes the saddle out of balance by making the pommel lower than the cantle, which in turn carries more pressure over the front of the tree (at the withers/shoulders) than a saddle with a properly sized tree.
Is a wider saddle better?
The shape of the saddle determines its best use. Wider saddles tend to be more comfortable so are good for long rides or leisurely riders where extra weight from more materials isn’t an issue. You need to be careful, if the saddle is too wide it can chafe whilst too thin can put a lot of pressure on soft parts.
How much should I add to sit bone width?
Your sit bones will leave an indentation on the paper. Use a measuring tape to measure the space between the indentations in millimeters not inches. Once you have the measurement, add 2cm (or 20mm). Saddle width is approximate to sit bone spacing + 2cm.
How do you make a wide saddle fit?
When a saddle is just a bit too wide all over, using a thick saddle pad can improve the fit. A thicker pad will help to fill in the space between your horse’s back and the saddle, resulting in a snugger, and usually more even fit.
What does full bars on a saddle mean?
This size saddle fits a horse who is healthy without excess fat or muscles on his upper shoulders. Full quarter horse bars are 6 1/4 to 6 1/2 inches apart. This size fits horses who are wider in the front shoulders than a semi-quarter horse bar size with extra muscle or fat.