How To Measure A Horse Saddle Seat?

How To Measure A Horse Saddle Seat? Seat size simply measures the distance from the base of the horn to the top middle of the cantle. This distance is then expressed as a size in half-inch increments from 12 inches to 17 inches.

How are Western saddle seats measured? It’s easy to measure a western saddle’s seat size. Use a retractable tape measure. Start the tape measure behind the swell and stretch it across the seat to the front of the cantle. That measurement is the seat size.

How do you measure a saddle gullet? The gullet of the saddle is the gap between the two bars of the saddle tree. It is measured at the front of the saddle. You measure your Western saddle’s gullet by stretching a tape measure from concho to concho across the front of the saddle directly below the pommel.

How do you tell if a saddle fits you? You should be able to stick two of your fingers between the saddle gullet and your horse’s withers. The saddle should have even contact along both sides of the bars. After girthing up, your saddle should look even on the horse’s back, not tipping up or drooping down.

How To Measure A Horse Saddle Seat – Related Questions

How do you measure a stock saddle seat?

Measure from front-most part of the pommel to inside back seat. Measure from the back of the pommel to inside back seat. INTERACTIVE: Select a saddle size from the box to see the relative saddle size and length.

What size saddle does a 16hh horse need?

Between 16.5 and 18.5 inches — Look for a 16-inch saddle. Between 20 and 21.5 inches — Try a 17-inch saddle. Over 21.5 inches — Try an 18- or 19-inch seat size.

What size saddle do I need for a 15hh horse?

Scapular to last rib 47cm/18 ¼” when you take off 5cm/2” for shoulder movement, that gives you 42cm /16” very small space for a saddle on a 15hh horse. 16.5” saddle set as far back as it can go without going past the last rib.

Can a saddle be too short for a horse?

A saddle can’t really BE too small for a horse – yes it can look like a pea on a drum, but as long as it is big enough for a rider it matters not.

How do you read a saddle serial number?

The next three digits of the serial number stamped on the saddle is a three digit serial number given to that particular saddle as an identifier of that individual saddle. After the three digit serial number, it is followed by four more numbers which is the date of manufacture.

What is a gullet on a saddle?

The gullet is the tunnel underneath the fork and rides over the horse’s withers. The design of the fork and the angle of the bars of the saddle tree determine the width and height of the gullet. Horses gullet, horses, saddle, tack.

How do you measure a saddle flap?

To measure the length of the flap, find where the stirrup connects to the saddle. Lift up that flap to reveal a piece of metal to hold the stirrup in place. Measure from the top of the piece of metal that holds the stirrup down to the edge of the bottom of the flap. That’s how you’ll get the flap length.

How do you tell if your saddle doesn’t fit your horse?

Physical Signs

Swelling along the back, saddle sores, girth galls etc are all tell-tale signs of poor saddle fit. After riding and removing the saddle, uneven sweat patterns under the saddle pad can indicate an issue with saddle fit. These come about when the saddle is making uneven contact with your horse’s back.

How do I know if my western saddle is too narrow?

Your saddle is too narrow if the front of the saddle sits high. When the saddle is sitting directly upon the horse’s withers, pinching can often occur. Your saddle is too wide if the front of the saddle is low. This also results in pinching but at the top of the saddle’s bars.

How wide should a saddle gullet be?

The ideal width for a saddle gullet is between 2.5″ and 4″ depending on your horse.

How do I know if my saddle has full quarter horse bars?

Measure the gullet by stretching a measuring tape from concho to concho across the front of the saddle, not over the top. Saddles with semi-quarter horse bars usually have gullets of 6 1/2 inches to 6 3/4 inches, while those with full quarter horse bars will feature gullets of 7 inches.

What happens if saddle is too big?

When a saddle is too wide in the front, it can sink down over the withers. This takes the saddle out of balance by making the pommel lower than the cantle, which in turn carries more pressure over the front of the tree (at the withers/shoulders) than a saddle with a properly sized tree.

How big is a 17 inch saddle?

Determine your size in an English saddle

A leg/seat measurement of 16.5-18.5 inches equals a 16-inch saddle. A leg/seat measurement of 18.5-20 inches equals a 16.5-inch saddle. A leg/seat measurement of 20-21.5 inches equals a 17-inch saddle. A leg/seat measurement of 21.5-23 inches equals a 17.5-inch saddle.

What is a half breed saddle?

A Half Breed Saddle is a cross between a traditional Stock and Western saddle, guaranteeing the rider comfort and longevity. Commonly used for trail riding, campdrafting and tentpegging these saddles are becoming popular with riders in general.

How do I measure my horse for a Wintec saddle?

Go to any saddle shop and ask to try some saddles of various sizes. English saddles are measured from the nail head in front of the rider’s leg, just down from the pommel, to the center of the cantle. Western saddles are measured in a straight line from below the horn to the cantle.

How tight should a saddle be on a horse?

The front cinch should be about as tight as your belt; if it’s comfortable for you, then it should be comfortable for the horse. Do not over tighten the cinch to compensate for a saddle that rolls. Check that the saddle is the correct fit for the horse.

What size saddle do I need for a 14.2 hh pony?

if you have a long leg then a 18inch but your 14.2hh may be too short in the back and may need a 17inch, might get away with a 17.5 inch.

Is my saddle too far back horse?

A saddle positioned too far back tends to sit on the “floating ribs”. This is the “bucking reflex point” – pressure on these unsupported ribs causes considerable discomfort, which can lead to bucking as the horse tries to alleviate the pressure.

How do you tell if your saddle is too small for you?

While you don’t generally see many people riding in saddles that are too large, it’s common to see riders in saddles that are too small. As a rule of thumb, you should be able to fit at least a four-finger width between the end of your seat and the cantle. Any less than that and the saddle is too small.

Are Tucker saddles good?

We have been riding Tucker Trail Saddles for over 10 years and enjoy them every time out. Great quality and well built. Tuckers are the best trail saddles. Very comfortable for the horse and rider.

What is considered a wide tree saddle?

If there’s 1/2″ to 3/4″ of space on either side of your fist, the saddle is approximately a medium tree. If there’s 0″ to 1/2″ then the tree is narrow; and if there’s more than 1″ of space on either side of your fist, the tree is wide or extra wide.