Table of Contents
How To Measure A Horse For A Western Saddle? To measure a saddle, grab a tape measure and vertically measure the length from the back of the pommel to the seam of the cantle. The measurement should usually be between 12 and 19 inches.
How do you know what size saddle your horse needs? There should be about four inches between your body and the swell of the saddle. Anything less than that may mean a too-small saddle, and a bigger gap means the saddle may be on the large size. Larger may be more comfortable for you. Western riders with longer legs should choose a larger-size saddle.
What size saddle do I need for a 15hh horse? Scapular to last rib 47cm/18 ¼” when you take off 5cm/2” for shoulder movement, that gives you 42cm /16” very small space for a saddle on a 15hh horse. 16.5” saddle set as far back as it can go without going past the last rib.
Can a saddle be too short for a horse? A saddle can’t really BE too small for a horse – yes it can look like a pea on a drum, but as long as it is big enough for a rider it matters not.
How To Measure A Horse For A Western Saddle – Related Questions
How are Western seat sizes measured?
It’s easy to measure a western saddle’s seat size. Use a retractable tape measure. Start the tape measure behind the swell and stretch it across the seat to the front of the cantle. That measurement is the seat size.
What is considered a short backed horse?
A horse is considered short-backed if his back length is less than one-third of his body length (measured from the point of shoulder to the point of buttock when the horse is standing square). Therefore, the shortness of this area where the rider sits will help the horse’s back from sagging under applied weight.
Is my saddle too far back horse?
A saddle positioned too far back tends to sit on the “floating ribs”. This is the “bucking reflex point” – pressure on these unsupported ribs causes considerable discomfort, which can lead to bucking as the horse tries to alleviate the pressure.
How do I know if my horse saddle is too long?
A horse ridden in a saddle that is too long will often tighten his lower back muscles; in some cases, you can actually see the horse hollow and drop his back in an attempt to get away from the pressure of the saddle. He may even buck in extreme cases, in an effort to get the weight off his lumbar area.
How do I measure a saddle gullet?
The gullet of the saddle is the gap between the two bars of the saddle tree. It is measured at the front of the saddle. You measure your Western saddle’s gullet by stretching a tape measure from concho to concho across the front of the saddle directly below the pommel.
What is a gullet on a western saddle?
The gullet is the tunnel underneath the fork and rides over the horse’s withers. The design of the fork and the angle of the bars of the saddle tree determine the width and height of the gullet.
How do you determine the width of a saddle?
Place the foil or cardboard on a carpeted stair and sit down, then pick up your feet to mimic your riding position. When you stand up there should be two depressions left by your sit bones. Measure the distance between the centres of the depressions and add 25 to 30mm to find your ideal saddle width.
How do you read a Circle Y serial number?
Format: There should be two lines of numbers on your serial plate. The top line is the model number. The bottom line is the serial number and will begin with the year of production. (This is the number to type in the search box to the right.)
What size is a red gullet?
If your gullet has been changed after purchase the colours are sized as follows: Yellow – Narrow, Green – Medium Narrow, Black – Medium, Blue – Medium wide, Red – Wide, and White is Extra wide.
How do you measure the gullet width on an English saddle?
Measuring the Gullet
Measure the gullet by stretching a measuring tape from concho to concho across the front of the saddle, not over the top. Saddles with semi-quarter horse bars usually have gullets of 6 1/2 inches to 6 3/4 inches, while those with full quarter horse bars will feature gullets of 7 inches.
What is the average gullet size for a quarter horse?
Semi-Quarter horse bars usually have a 6 1/4″ gullet, and Quarter Horse Bars usually have a 6 1/2″ to 6 3/4″ gullet. Designed to fit the average horse, one of these two widths will fit approximately 80% of horses comfortably. Full-Quarter horse bars usually have a 7″ gullet.
Can you use a mule saddle on a horse?
A Horse Saddle Does Not Fit A Mule
Yes, they look similar. But a mule is also part donkey and the donkey’s bone structure is fundamentally different than a horse’s. The mule gets his bone structure, or skeletal structure, from the donkey.
How do I know if my western saddle is too narrow?
Your saddle is too narrow if the front of the saddle sits high. When the saddle is sitting directly upon the horse’s withers, pinching can often occur. Your saddle is too wide if the front of the saddle is low. This also results in pinching but at the top of the saddle’s bars.
How do you fit a saddle to a horse with high withers?
In fitting a saddle to a high-withered horse, you will need to lift the saddle away from the withers or have a saddle with high gullet built-in. This can be accomplished by using a saddle whose panels or bars match the slope of the horse’s back muscles, then raising the saddle up off of the withers using pads.
What is the proper way to sit on a horse?
Keeping a straight line from the ear, to the shoulder, to the hip, to the back of the heel is crucial for balance. Stand on the ground with your legs apart (as if astride a horse) bend your knees slightly. All the while keeping your back straight. Your body should be in alignment.
How do you tell if a saddle fits the rider?
So how do you know if a saddle fits the rider? There used to be the “one hand” rule: if the saddle was correct for the rider, the rider should be able to put one hand across the saddle seat between the back of their butt and the end of the cantle.
How should a dressage saddle fit the horse?
The saddle shouldn’t sit too far forward, which would prevent the horse’s shoulder from moving freely. When the horse moves, his shoulder blade (scapula) can move backward by up to three inches. The placement of the saddle must allow the saddle to clear the shoulder so that the horse can move freely.
Is a short backed horse good?
Short backed horses tend to be more agile and carry weight on their back better (think about all the weight your horse carries on an unsupported portion of it’s anatomy). But he may not flex/bend along the back as well because their is just less length to bend and gaits may not be quite as smooth.
What happens if a saddle is too wide?
When a saddle is too wide in the front, it can sink down over the withers. This takes the saddle out of balance by making the pommel lower than the cantle, which in turn carries more pressure over the front of the tree (at the withers/shoulders) than a saddle with a properly sized tree.
How do I know if my saddle is too small?
While you don’t generally see many people riding in saddles that are too large, it’s common to see riders in saddles that are too small. As a rule of thumb, you should be able to fit at least a four-finger width between the end of your seat and the cantle. Any less than that and the saddle is too small.
How long does a saddle fitting take?
A fitting appointment can vary in time depending on what is happening at the appointment. Check of your existing saddle = approximately 45-60 minutes with you. Try on new/used saddles = approximately 2-2.5 hours.