Are Golden Lion Tubes Rebranded Mullard?

Are Golden Lion Tubes Rebranded Mullard?

Are Gold Lion tubes any good? Original Genalex Gold Lion ECC83/B759/12AX7 tubes are considered among the best 12AX7 tube types ever made. They are hard to find and when they are available, they are expensive. They exhibit a large detailed soundstage that is sought after by discerning audiophiles who demand the highest quality sound.

Do gold pin tubes make a difference? AFAIK, there’s no difference between regular and gold pin tubes. As already mentioned before, the pins are only gold plated, but the reason for the gold plating of pins (or any other connector) is to prevent the metal surface to corrode.

Are Chinese tubes any good? Chinese tubes are quite satisfying in my opinion. Not only more affordable, but also reliable and sonically good. I’m using the KT88 from Shuguang and compared to other brands that I tried on the same amplifier, the results (sonically) are not much different – especially when looking at the price difference.

Are Golden Lion Tubes Rebranded Mullard – Related Questions

Is 12AX7 the same as ECC83?

The 12AX7 Valve (or 12AX7 vacuum Tube) is a small preamplifier valve which is identical to the ECC83 – same valve, just a different name. It has two identical triodes both of which have a high voltage gain. In fact, it is one of the few small-signal vacuum tubes in continuous production since it was introduced.

Where are Genalex Gold Lion made?

Made in China (all other Gold Lion tubes are made in Russia). Matched & Balanced Premium quality tube. High quality upgrade to be considered when a change of ECC83 / 12AX7 tubes in an amp is needed.

Who makes Genalex?

The Original Genalex name was owned by the Marconi-Osram Valve Company with the Genalex in the name used in the U.S.A. The Gold Lion was a specially selected and factory tested version.

Who makes Northern Electric tubes?

Western Electric licensed their designs, processes, and technology to Northern Electric for the first fifty years of their production. We are now re-introducing this classic brand and bringing to you the highest quality audio tubes possible.

Which 12AX7 sounds best?

The most exclusive ECC83 12AX7 type is the Genalex Gold Lion ECC83. The Original Genalex Gold Lion ECC83/B759 tubes are considered among the best ECC83 / 12AX7 types ever made. . They exhibit a large detailed soundstage that is sought after by discerning audiophiles who demand the highest quality sound.

How long does a 12AX7 tube last?

Small signal tubes like a 12AX7 or 6922 will work well on average for about 10,000 hours.

What tubes are made in Russia?

Vacuum tubes have been made in Russia for almost 100 years. Some popular brands are Reflektor, SED SPb/J.S.C. Svetlana, Ulyanov, JSC Voskhod, and Novosibirsk. If you are looking for a rare Russian tube for your amplifier we can help.

Where are groove tubes made?

In August, Groove Tube operations moved into Fender facilities in Ontario, Calif., and Scottsdale, Ariz., while production moved to a factory in Mexico. Citing a nondisclosure agreement, Pittman would only say that Groove Tubes sold for 10 times its annual earnings.

Are Tung Sol tubes good?

The current TungSol 12ax7 is by far the best quality out there . The highs are clear and clean an the entire sound is transparent compared to a JJ . Yes , they’re somewhat more expensive , but for V1/2 in a clean amp they are unbeatable , Tubedepot will provide every possible grading option too , which others don’t .

Where are 12AX7 tubes made?

Manufacturers. As of 2018 versions of the 12AX7/ECC83 are available from the following manufacturers: In China: Shuguang and Quanzhen Electron Tube Technology (sold as TJ FullMusic) In Russia: New Sensor, which produces tubes under the Sovtek, Electro-Harmonix, Svetlana, Tung-Sol, and Mullard brands.

Can I use 12AX7 instead of 12AX7A?

These are not military tubes and are not NOS tubes at all. Also, as tube manufacturing became refined, the 12AX7A became much quieter. So much in fact that a lot of 12AX7A’s were labeled 7025’s (a very quiet version of the 12AX7). So the bottom line is that you can use either of these tubes in your Marshall amp.

Can you replace a 12AX7 with an ECC83?

Changing tubes in an amp can be a particularly challenging experience, especially since there seem to be so many of them. In this article, we’ll concentrate on the question of the ECC83 vs 12Ax7 tubes. The truth is, there is no difference at all between them, and each one is interchangeable with the other.

What tubes can replace 12AX7?

You can interchange a 12AX7 with 12AT7, 12AU7, 12AY7 or 5751 as they are all the same pin structure, however they will each give you a different result in your amp. Each of these tubes has a different gain factor, which means some will give higher gain and others lower gain.

Who makes gold lion vacuum tubes?

Amplifier Tubes & Valves | Genalex Gold Lion | Electro-Harmonix.

Are EL34 and KT77 interchangeable?

The quick answer to the difference between EL34 vs 6CA7 or EL34 vs KT77 is simple. EL34, 6CA7 and KT77 are all drop-in replacement of each other. You can use 6CA7 or KT77 in place of EL34. Electrically, they are the same.

What is the difference between 12AX7 and 12AX7A?

12AX7A is an “updated” lower noise version of 12AX7, and as Mr. Hoffman said it has to do with the way the heater is designed. Another 12AX7 “update” are 7025 tubes which are supposedly less noisy than 12AX7A and with lower hum, again because of heater being redesigned.

Do preamp tubes make a difference?

A good tube pre can make a huge difference in sound presentation. The longer they’re on the better they sound.

Do preamp tubes need to be replaced?

You should replace them when they are dead. There is no set rule for how long they last, but in general, they last longer than power tubes. Maybe twice as long or better life expectancy for power tubes. They are also self-biasing of course, so don’t be afraid to change them yourself.

Is a 12AX7 the same as a 7025?

The ECC83 (12AX7) Valve

The answer is simple. In ‘theory’ you’ll get a bit lower noise and lower hum with a 7025. Otherwise, they are identical.

What is a vacuum tube radio?

A vacuum tube, also called a valve in British English, is an electronic device used in many older model radios, television sets, and amplifiers to control electric current flow. The cathode is heated, as in a light bulb, so it will emit electrons. The anode is the part that accepts the emitted electrons.

Are Groove Tubes good?

The JJs are very reliable, a little more expensive, and sound pretty good. The Groove Tubes GE 6L6 clone is a unique design that sounds great and reminds me of the vintage Sylvania 6L6GCs, but they aren’t particularly reliable. The Sovtek 5881 isn’t really a 5881 or a 6L6, but it’s still a great tube in its own right.